Proton PSD-SSD Solid State Destroyer

Proton PSD-SSD Solid State Destroyer

PSD-SSD Destroyer

Ensures all memory chips are destroyed to prevent data retrieval
• Allows compliance with recognized security standards and regulations, including NIST, HIPAA, FACTA, PCI DSS, GLBA, PIPEDA, IRS, GDPR, etc.
• Simple operation: Insert PDS-SSD into your Proton destroyer (PDS-75 or PDS-100) then place media inside drawer and close. Operate destroyer normally – blade will lower through insert and press down on internal plate, pushing numerous spikes through the media. Blade will then return to starting position automatically. Open drawer to remove punctured/perforated media
• Drawer is fully removable so operator does not have to handle
damaged media
• No consumables; eliminates need to buy media transport sleeves to handle small flash drives or thumb drives
• Optional barcode scanner with audit-tracking system available
• Made in the USA
• 1-year parts and labor warranty

Description

Description

The PSD-SSD Destroyer adds solid state (SSD) destruction capability to the NSA listed PDS-75 and PDS-100 hard drive (HDD) destroyers. It drives spikes through SSD and flash-based media ensuring all memory chips on the boards are destroyed. This assures data is unrecoverable.

Simply replace the debris tray from your Proton destroyer with this SSD insert – takes less than 10 seconds and no tools required.

Additional information

Additional information

Destruction Chamber / Max Media Size: 6”D x 0.5”H x 3”W (15.24cm x 1.27cm x 7.6cm)
Media Taken: Standard SSDs, cell phones, SIM cards, flash drives, USB thumb drives, SSHD controller boards, etc.
Destruction System: Electrogalvanized steel spikes
Cycle Time: 8-10 seconds
Operation: Automatic sensor start or manual (operates without electricity)
Dimensions: 6.22”D x 3.72”H x 5.34”W (15.8cm x 9.4cm x 13.5cm)
Weight: 3.5 lbs (1.59 kg)

More HDD destruction machines:

sem-0101

SEM 0101 Sledgehammer Hard Drive Destroyer

SEM 0101 Sledgehammer Hard Drive Destroyer The SEM Model 0101 Hard Drive Crusher has been "evaluated by the NSA/CSS and meets NSA and DoD compliance guidelines for the physical damage of media" with a durability rating of 204 drives/hour. This hard drive crusher destroys all hard drives regardless of size, format or type up to [...]
PDS_100_crusher_3

Proton PDS-100 Hard Drive Destroyer

PDS-100 HARD DRIVE DESTROYER NSA/CSS Evaluated and Listed for destruction of 1-inch, .65-inch, 1.65-inch & Laptop Hard Drives The PDS-100 provides an automatic, motor driven operation - simply insert the hard drive and sensors will automatically start the destruction cycle. A unique feature of the PDS-100 is its ability to operate manually if power is [...]
crusher2

Proton PDS-75 Hard Drive Destroyer

PDS-75 HARD DRIVE DESTROYER NSA/CSS Evaluated and Listed for destruction of 1", 0.65", 1.65" & Laptop Hard Drives The PDS-75 is designed to physically destroy all standard hard drives without the use of power in 8 seconds or less. Insert the hard drive into the slot and crank the handle 8 rotations to destroy the [...]

More information about Proton PDS-SSD destroyer?

Please send us a message:






    SEM 0101 Sledgehammer Hard Drive Destroyer

    SEM 0101 Sledgehammer Hard Drive Destroyer

    The SEM Model 0101 Hard Drive Crusher has been “evaluated by the NSA/CSS and meets NSA and DoD compliance guidelines for the physical damage of media” with a durability rating of 204 drives/hour. This hard drive crusher destroys all hard drives regardless of size, format or type up to 1.85″ high including desktop, laptop and server drives. The Model 0101 hard drive crusher is an ideal way to meet the destroy mandate as part of the DoD’s Degauss and Destroy specification.

    Product Details:

    1. “Evaluated by the NSA/CSS and meets NSA and DoD compliance guidelines for the physical damage of media” with a durability rating of 204 drives/hour.
    2. Destroys all hard drives regardless of size, format or type up to 1.85″ high including desktop, laptop and server drives.
    3. An ideal way to meet the destroy mandate as part of the DoD’s Degauss and Destroy specification.
    4. Delivers 12,000 pounds (or 490K PSI) of force to a conical punch causing catastrophic trauma to the hard drive chassis while destroying the internal platter
    5. Quiet, smooth and virtually vibration free
    6. Destruction takes only 8 seconds (Note: The Model 0101 Hard Drive Crusher can destroy up to 4 standard laptop drives or 6 ultra-thin laptop drives in one 8 second cycle).
    7. A safety interlock prevents operation of the hard drive crusher while door is open, and an emergency e-stop immediately halts operation when pressed
    8. The only unit with a chamber large enough to fit hard drives mounted with rails or handles from hot-swap trays
    9. Automatic Hard Drive Crusher
    10. NSA Evaluated and Listed
    11. Bends, pierces and mangles drives
    12. Made in the USA

     

    At the touch of a button, the SEM Model 0101 Hard Drive Crusher delivers 12,000 pounds (or 490K PSI) of force to a conical punch causing catastrophic trauma to the hard drive chassis while destroying the internal platter. The unit is quiet, smooth and virtually vibration free. Destruction takes only 8 seconds (Note: the Model 0101 Hard Drive Crusher can destroy up to 4 standard laptop drives or 6 ultra-thin laptop drives in one 8 second cycle).

    A safety interlock prevents operation of the hard drive crusher while door is open and an emergency e-stop immediately halts operation when pressed.

    The SEM Model 0101 Hard Drive Crusher is the only unit with a chamber large enough to fit hard drives mounted with rails or handles from hot-swap trays.

    Specifications

    Technical Information
    Operation Pushbutton automatic
    Crushing Force 12,000 lbs (or 490K PSI)
    Destruction Cycle 8 sec.
    Motor 1/3 HP
    Electrical 115/1/60Hz (220/230-50Hz available)
    Dimensions 22″H x 10″W x 19″D
    Weight 115 lbs
    Drive Types All hard drives regardless of size, format or type (up to 1.85″ high and 9″ deep), including four standard or six ultra thin laptop/notebook drives at once.

    Who uses SEM 0101 HDD crusher?

    Hospitals, data centers, and other facilities that needs to destroy large quantities of confidential/sensitive information in a timely manner in accordance Offices, with various government regulations and industry standards (HIPAA, FACTA, SOX, PCI DSS, etc.)

    https://youtu.be/h9ybp6_jvVY

    More information about SEM 0101 Sledgehammer HDD destroyer?

    Please send us a message:






      More HDD destruction machines:

      Proton PDS-100 Hard Drive Destroyer

      hdd crusher

      PDS-100 HARD DRIVE DESTROYER

      NSA/CSS Evaluated and Listed for destruction of 1-inch, .65-inch, 1.65-inch & Laptop Hard Drives

      The PDS-100 provides an automatic, motor driven operation – simply insert the hard drive and sensors will automatically start the destruction cycle. A unique feature of the PDS-100 is its ability to operate manually if power is ever interrupted or unavailable. Simply grab the crank handle to continue securely destroying hard drives. No stoppage or setup necessary.

      Product Details

      Tested and used by NSA and DoD for destroying hard drives

      • Compact and rugged design is portable and easily deployable
      • Automatic cycle provides fast, safe and reliable hard drive destruction in 10 seconds or less.
      • Can operate with or with out power (manually for emergency situations).
      • Hard drives are bent approximately 90 degrees, which bends / breaks the platers and damages the heads, motor and circuit board.
      • Maintenance free and completely self-contained. No messy fluids or external components to deal with and no adjustments or calibration necessary.
      • Laptop carrier allows for destruction of 2.5″ form factor laptop drives.
      • Customization is easy (see options )

      NOTE: To comply with recognized standards, including NSA / DoD regulations, a degausser must be used prior to destroying hard drives. In a typical national security operation, a destroyer is used in conjunction with a NSA-approved degausser. Using a degausser is the only way to guarantee all data on hard drives and other magnetic media is completely unrecoverable. This is because it is possible to recover data from a small piece of a hard drive that has not been degaussed.

      Specifications

       

      Media Destroyed: Handles all 3.5″ Form Factor Drives including 0.65″, 1″ and1.65″ high drives. Destroys 2.5″ laptop hard drives with laptop carrier (included). Also handles SSDs (not NSA evaluated for SSDs) in 3.5″ Form Factor and 2.5″ Form Factor with the included laptop carrier.
      Dimensions: Footprint: 21″ H x 7.25″ W x 11.625″ D (53.3cm x 18.4cm x 29.5cm); 11″(28cm) wide w/ handle
      Weight: 63lbs.(shippingweight:84lbs.)
      Power Supply: 100 to 250 VAC, 50 or 60Hz (specify voltage & frequency when ordering)
      Destruction Method: Bends / breaks platers, damages heads, motor and circuit board
      Cycle Time: 60Hz units: 10 seconds or less, 50Hz units: 12 seconds or less; Hand Crank: 8 seconds or less
      Waranty: 1 Year Parts & Labor; 1-Year extended waranty available; Lifetime warranty on blade / bender
      Options: Rear Output; Autoloader & Slide with Rear Output; Rack-mountable Slide-OutShelf; Remote Control Communication; Universal Screw Down Mounting Kit, Deployment Case with wheels (see details options)

      Options

      Rear Output Slide(RO) – Hard drives are typically removed from the front of the unit but this option allows for the ejection of the hard drives out the back of the unit. This enables hard drives to be discharged into a disposal bin or container and requires less operator handling.

      Autoloader (AUTO) A front mounted input slide that allows for automated insertion. The hard drive is simply placed onto the slide and is then automatically fed down to the insertion platform. The drive is then pushed into the PDS-100 and destroyed. After destruction the drive is ejected from the rear of the machine down the rear output chute. This option includes the Rear Output Slide

      Rack mountable Slide-out Shelf (RACK) For mounting in standard 19-inch EIA racks. This option allows the user to conveniently stow the destroyer when not in use and pull it out when needed, saving all too valuable table-top space. This option includes the Mount Kit (seebelow).

      Remote Control Communication (RC) RJ45 connector for operating destroyer with other equipment such as computers and robotics.

      MountKit (MK) This option allows the customer to mount the destroyer to various surfaces, including carts,

      truck floors, racks ,etc.

      Deployment Case (CASE) A heavy duty Pelican¨case with wheels and custom insert made specifically for the destroyer.

      More information about PDS-100 HARD DRIVE DESTROYER?

      Please send us a message:






        More HDD Destroyers?

        Proton PDS-75 Hard Drive Destroyer

        PDS-75 HARD DRIVE DESTROYER

        NSA/CSS Evaluated and Listed for destruction of 1″, 0.65″, 1.65″ & Laptop Hard Drives

        The PDS-75 is designed to physically destroy all standard hard drives without the use of power in 8 seconds or less. Insert the hard drive into the slot and crank the handle 8 rotations to destroy the drive. After the process is finished the hard drive is ejected into the front debris drawer; an optional rear output chute is also available.

        Product Details:

        • Compact and rugged design is portable and easily deployable.
        • Less than 8 second cycle time provides fast, safe and reliable hard drive destruction.
        • Specifically designed for emergency situations where power may not be available and quick destruction is required.
        • Provides a green energy saving solution for hard drive destruction.
        • Hard drives are bent approximately 90 degrees, which bends/breaks the platers and damages the heads, motor and circuit board.
        • Maintenance free and completely self-contained. No messy fluids or external components to deal with and no adjustments or calibration necessary.

        Tested and used by the NSA and DoD for destroying hard drives.

        Laptop carrier included – allows for destruction of 2.5″ form factor laptop drives. Customization is easy (see options)

        NOTE: To comply with recognized standards, including NSA/DoD regulations, a degausser must be used prior to destroying hard drives. In a typical national security operation, a destroyer is used in conjunction with a NSA-approved degausser. Using adegausser is the only way to guarantee all data on hard drives and other magnetic media is completely unrecoverable. This is because it is possible to recover data from a mere piece of a hard drive that has not been degaussed.

        Specifications

        Media Destroyed: Handles all 3.5″ Form Factor Drives including 0.65″, 1″and 1.65″ high drives.
        Handles 2.5″ laptop hard drives with included laptop carier. Handles SSD drives
        (not NSA evaluated for SSD) in 3.5″ & 2.5″ Form Factor with the laptop carrier.
        Cycle Time: 8 seconds or less
        Physical Dimensions: 16.5″ H x 7.25″ W x 9.25″ D (41.9cm H x 18.4cm W x 23.5cm D)
        Weight: 49 lbs. (shipping weight: 64lbs.)
        Destruction Method: Bends/breaks plater, damages heads,motor and circuit board
        Maintenance: Occasional vacuuming of debris drawer and internal housing
        Operator Exertion: Commercial drives(3.5″) – typically 4 lbs. exertion; Hardened (heavy shielding ) 3.5″
        Drives-typically 12 lbs. exertion
        Warranty: 1 year with extended warranty available; Lifetime warranty on blade/bender
        Options: Rear Output Option; Rack mountable Slide-out Shelf (for 19″ EIA racks, 10″ to 28″ deep) includes Slides; Universal Screw Mounting Kit; Deployment Case with wheels

        Options

        Rear Output Slide (RO) -Hard drives are typically removed from the front of the unit but this option allows for the ejection of the hard drives out the back of the unit. This enables hard drives to be discharged into a disposal bin or container and requires less operator handling.

        Rack mountable Slide-out Shelf (RACK) For mounting in standard 19-inch EIA racks. This option allows the user to conveniently stow the destroyer when not in use and pull it out when needed, saving valuable table-top space. This option includes the Mount Kit (see below).

        Remote Control Communication (RC) J45 connector for operating destroyer with other equipment such as computers and robotics.

        Mount Kit (MK) This option allows the customer to mount the destroyer to various surfaces, including carts, truck floors, racks, etc.

        Deployment Case (CASE) A heavy duty Pelican case with wheels and custom insert made specifically for the destroyer.

        More information about Proton PDS-75 HDD destroyer?

        Please send us a message:






          More HDD destruction machines: